Erlab
ÉTATS-UNIS Change your country
Contact us
800 964 4434
captairsales@erlab.com
Experts in air filtration for the protection
of laboratory personnel since 1968
banner bio

PCR workstations
Save your time while saving your samples
 
PCR Workstation
 
Complete protection for you and your samples
 
The CaptiarBio PCR workstation features a HEPA H14 filter, stainless steel work surface, and a UV light with a timer that provides the proper sterilization to protect your samples from contamination. Raising the sash automatically shuts off the UV lamp when the front shield is opened.
Add a carbon filter with the HEPA filter to guarantee that ultra clean air will flow into the enclosure.
  • ISO 5 air quality in the enclosure
  • The unique fan design delivers an even air flow to eliminate turbulence.
  • UV light with reflective panels provide decontamination and easy visibility within the enclosure.
  • Digital control panel for continuous monitoring of the ventilation flow rate and audible alarm.
  • UV timer from 1 to 30 minutes.
  • Rear panel ports to accomodate electrical lines.
  • Enclosure is made with synthetic glass (10mm thick) designed to protect the user from harmful UV rays.


download catalog
request a quote
 
Typical Applications:
• Sample preparations before thermal cycling
• Post PCR DNA sequencing revelation / separation
• Invitro fertilization
• Cellular cultures
• Vegetal biologypreparation of sterile solutions

4 new models

  • New enclosure design - from 80 cm to 1,8 m
  • Stainless steel worktop with a built in spill tray
  • Rolling or fixed bench available
  • No ductwork needed
  • Easy to reloate

Powerful UV decontamination
  • Prevents your samples from cross contamination risks  
  • 254 nm UV lamp power
  • Adjustable timer 
  • Automatic UV lamp cut off switch in case of an unexpected front door opening during enclosure decontamination 
 
Modular filtration column / Air quality into the enclosure
  • HEPA H 14 filter : 99,995% filtration efficiency  for particles larger than 0.1 microns (according to the EN1822-1 standard, MPPS method).
  • Vertical laminar air flow entering into the enclosure avoiding any external contamination
  • Optional carbon filter can be added to protect handlings from VOCs present into the laboratory air
 
Very low energy consumption
  • Maximal consumption of 150 W
 
 
      
 
Energy Consumption
  Dimensions in mm & Inch
(W x D x H)		 Download the data sheet in PDF  
Captairbio_shelf_812CaptairBio 320

consommation energetique - 18 W
 Ext: 825 x 630 x 647 
Int: 765 x 550 x 525

Ext: 32’’ 1/4x24’’ 3/4x25’’ 1/2
Int: 30’’ 1/8x21’’ 5/8x20’’ 11/16

For USA:

 devis 
CaptairBio_321
CaptairBio 321

consommation energetique - 75 W
 Ext: 820 x 630 x 885
Int: 765 x 550 x 525

Ext: 32’’ 1/4x24’’ 3/4x34’’ 7/8 mini
38’’ maxi
Int: 30’’ 1/8x21’’ 5/x20’’ 11/16

For USA:
  devis
CaptairBio_hotte_PCR
CaptairBio 391
consommation energetique - 75 W
 Ext: 1030 x 630 x 945
Int: 765 x 550 x 525

Ext: 40’’ 9/16x24’’ 3/4x37’’ 1/4 mini
40’’ 3/8 maxi
Int: 38’’ 3/16x21’’ 7/8x23’’ 7/16

For USA:
devis
 
 
Features on an Erlab CaptairBio PCR Workstation
 captairBio_panneau_de_controle Control panel (sauf 320):
Flow monitor: This device monitors the air flow and warns the user through a visual and audible alarm in case of fan failure.
UV cut-off: Automatic shut off of the UV lamp when the front shield is opened
U.V. Timer: UV timer set up : from 1 to 30 minutes
Captairbio_lampe_UV Bactericidal UV Lamps
15W - Wavelength : 254 nm
 
eclairage Internal lighting
Compact tubular fluorescent lighting - 18 Watts - 500 Lux - IP 67
 captairbio_opercules Energy ports
Located on the enclosure side panels, they allow the passage of power cables/ fluid pipes in the enclosure without discomfort for the user. 
 
Optional Accessories
pdt-verre Tempered glass Work surface
With rounded edges for arm rest and a comfortable working position
pdt-inox Work surface in stainless steel 304 L
High chemical and mechanical resistance. Rounded corners to facilitate cleaning operations. Built in spill tray.
filtre_gf4 Molecular filter (except Bio 321 S)
Carbon filter for the asdorption of ambiant air VOCs (AS-BE+- F-K types, see our current pricelist)
Mobicap Mobicap™
Rolling cart made of anti-corrosion metallic alloy
Benchcap Benchcap™
Fixed work bench made of anti-corrosion metallic alloy
 Shelf Shelf
Metallic adjustable sliding shelf for Mobicap™ and Benchcap™
 
 

Working principle
bio working principle 1 - Filtration
The fan draws in air from the laboratory and passes it through a HEPA H14 filter, which is over 99.995% effective at trapping particles over 0.1 microns in size.


2 -Sample protection
The air that enters the enclosure is free from all outside contamination, creating an ultra-clean atmosphere in which to work protecting your samples from contamination.


3 - Central screen
The central screen located at the front of the device further protects substances being handled from any contamination given off by the user.


4 - Decontamination
A UV lamp allows the working environment to be decontaminated in order to prevent contamination of samples between PCR operations.



Flex Technology

The modular conception of our CaptairBio PCR workstations filtration column allows to perform handlings in a free of any external contamination and provides an ultra clean work atmosphere. 
Click to enlarge
technologie Flex