800 964 4434
captairsales@erlab.com
Experts in air filtration for the protection
of laboratory personnel since 1968
 
Halo Smart
 

Laboratory Grade Air Filtration System                                                                                                    

 


 

 
Halo Smart

Erlab Filtered Fume Hoods - Marywood University case study

 
 
Erlab offers lab-grade quality air filtration in any space, from classroom to offices, to general laboratories They are affordable and easy-to-install with no ductwork, saving you time and money while still delivering healthier air. Halo SMART purifiers guarantee laboratory-grade air quality by filtering all gas, viral and bacterial pollutants at the source. 
Benefits of Erlab Halo:
  • Wall mounted (HEPA ONLY) or ceiling mounted (HEPA & Carbon)
  • Laboratory grade filtration – HEPA, or Carbon
  • Mitigates the risk of propagation of chemical, or viral contaminates
  • No HVAC upgrades needed, means less concern of proper room balance and control of RH levels, and less upfront and operational cost
  • Runs 24/7. No accidental shut off
  • Contributes to controlled direction air flow patterns
  • Easy filter replacement
  • Connected via app on PC, mobile, or tablet for remote access and visual of each unit’s performance
  • It can capture the aerosolized contaminants within seconds and other pollutants which cause health problems and can become catalysts for virus particles
  • Very low energy consumption (50w)

Halo is continuously pulling the dirty air in through the filter, circulating clean purified air back into the room with “coanda” flow dispersion, for even distribution of air flow.  The Halo works with two filter types, carbon filtration powered by Neutrodine technology ®, and Particulate HEPA H14, or ULPA U17 filters. The Carbon filter “adsorbs” toxic chemical emissions present within the ambient air, while the HEPA/ULPA filter “absorb” viruses, allergens, and bacterial pollutants.
A combination of Halo’s can be installed in any room to provide optimal protection, and a cleaner environment.
Halo Smart continuously evaluates the air quality and filters noxious chemicals and odors to help keep the air clean. 
 
 
 
HALO C
HALO P
External width
(mm / in)
592 / 23.25
592 / 23.25
External depth
(mm / in)
892 / 35.25
892 / 35.25
External height
(mm / in)
260 / 10.25
303 / 12
Air flow
(m3/h / CFM)
220 m3/h / 130 CFM
300 m3/h / 175 CFM
Safety Standards:
AFNOR NF X 15-211:2009 : France BS 7989 : England  DIN 12 927 : Germany 
EN 1822 : 1998 (HEPA H14 & ULPA U17 Filters)  CE Marking  UL Listed
Voltage / Frequency (V/Hz)
80-240VAC 50/60Hz
80-240VAC 50/60Hz
Power
consumption
50 Watt
50 Watt
Operating mode
24/7, day / night, Alerts
Ceiling mounted
Hung via 4 eye bolts (included)
Hung via 4 eye bolts (included)
Wall mounted
(N/A)
Wall adapter frame (optional)
Weight (kg/lbs)
31 kg - 68 lbs (filter included)
31 kg - 68 lbs (filter included)
Protected surface
(m2 / ft2)
25 m2 / 270 ft2
35 m2 / 375 ft2
FEATURES
Communication
interface
Simple communication by LED pulsations: fan settings, usage timer,
fan failure, automatic filter performance detection
eGuardÒ app
App for remote control to monitor HALO units, change the settings, and
deliver safety alerts immediately to your devices (mobile, tablet and PC).
Connectivity
RJ45 ethernet cable connection
Filter performance sensors
Semiconductor for
VOCs
Electro-chemical
sensor for Formaldehyde
Semiconductor for
a wide array of
pollutants
Timer Based
OPTIONS
Carbon filtration for
gases and vapors
AS :
For organic vapors
F :
For formaldehyde vapors
BE+ :
For organic vapors and acid vapors
(N/A)
Particulate filtration for
powders
(N/A)
HEPA H14 filtration efficiency: 99.995 % according to MPPS method, EN1822 standard
ULPA U17 filtration efficiency:
99.999995% according to MPPS method, EN1822 standard
Prefilter
Particulate filter
Particulate filter
Postfilter
Particulate filter
(N/A)
STRUCTURE
Metallic frame
Anti-corrosion steel coated with 100% polyester
Filtration module
Injected polypropylene
Aluminum